说起电动门相信大家都不陌生吧，它在我们的日常生活中很常见，一般电动门都附带有显示屏。显示屏属于显损件，在使用时间久了之后容易发生一些故障。那么大家知道这些日常故障有哪些，又该怎么解决呢？
Speaking
of electric doors, I believe everyone is familiar with them. They are
very common in our daily lives, and generally electric doors come with a
display screen. The display screen is a display loss component, and it
is prone to some malfunctions after prolonged use. So everyone knows
what these daily faults are and how to solve them?
1.显示器不工作
1. The display does not work
电动门显示屏不工作。一般阳雕刻 手套生产设备 果树反光膜 北京纯水设备 保定网站制作 排水槽模具是由于打雷、停电或供电造成的。此时将电动伸缩门显示屏断电，一两分钟后再插上。
The
power door display screen is not working. Usually caused by lightning,
power outage, or power supply. At this point, turn off the power on the
electric telescopic door display screen and plug it in again after one
or two minutes.
2.显示屏不亮
2. The display screen does not light up
一般电动门显示屏是与变压器的连接线没有接好，或者是连接线损坏。此时可以重新连接或更换。
Generally,
the connection wire between the electric door display screen and the
transformer is not properly connected, or the connection wire is
damaged. At this point, it can be reconnected or replaced.
3.时间不准确
3. Inaccurate time
由于时间不准确，一般出现这种故障的原因是显示屏电池没电了。电动门厂家表示，此时需要电池。更换电池后，重新连接电脑调整时间，然后安装并密封相关部件。
Due
to inaccurate timing, the common cause of this malfunction is that the
display battery is out of charge. The manufacturer of the electric door
stated that a battery is required at this time. After replacing the
battery, reconnect the computer to adjust the time, and then install and
seal the relevant components.
4.显示器无法输入想要的字体
4. The monitor cannot input the desired font
在这种情况下，首先检查数据线是否与显示屏连接良好或错误，只需连接或更改就行了。
In
this case, first check if the data cable is connected well or
incorrectly to the display screen, just connect or make changes.